Wago 750-600 PLC Standard Bus End Module

Wago 750-600 PLC Standard Bus End Module About

The WAGO 750-600 is a standard Bus End Module designed for the WAGO I/O System 750 and 753 series. It is a mandatory component used to terminate the internal data bus of a fieldbus node, completing the communication loop and ensuring proper data flow across all connected modules

Key Functions & Purpose

• Completes the Data Loop: Closes the internal data circuit of the local fieldbus node.
• Prevents Signal Loss: Ensures consistent signal integrity across the internal backplane.
• System Requirement: Must be placed as the final module on every standard 750/753 series stack for the PLC or coupler to function

Technical Specifications

• Module Width: 12 mm.
• Mounting Type: 35 mm DIN-rail mounted.
• IP Rating: IP20 protection standard.
• Housing Material: Polycarbonate / Polyamide (PA 66).
• Operating Temperature: 0C to 55C.
• Relative Humidity: Up to 95% (non-condensing).
• Certifications: CE, UL 508, ANSI/ISA 12.12.01, ATEX, and IECEx